Dumps4PDF HPE6-A66 Exam Questions | Real HPE6-A66 Practice Dumps
Verified HPE6-A66 Exam Dumps Q&As - Provide HPE6-A66 with Correct Answers
Understanding functional and technical aspects of Plan and design an Aruba solution percustomer requirements
The following will be asked from you in the HP HPE6-A66 dumps:
- Given the customer requirementsfor a single-site campus environment design the high-level Aruba solution
- Given a scenario, select the appropriate products based on the customer’stechnical requirements for a simple campus environment
- Given a customer scenario, explain how a specifictechnology or solution would meet the customer’srequirements
Understanding functional and technical aspects of Produce a detailed design specification document
The following will be asked from you in the HP HPE6-A66 dumps pdf:
- Given the customer requirementsfor a simple site environment determine the component details and document the high-level design
- Given the customer’srequirements, explain and justify the recommended solution.
- Given the customer scenario and service level agreements, document the licensing and maintenance requirements
- Given a customer scenario of a simple site environment, design and document the logical and physical network solutions
- Given a customer scenario for a simple campus environment, choose the appropriate componentsthat should be included in the BOM
NEW QUESTION 17
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
- A. Two 2930M 24-port POE+ switches
- B. One 3810M 40G 8 HPE Smart Rate switch
- C. One 2930M 48-port POE+ switch
- D. Two 2930F 24-port POE+ switches
Answer: C
NEW QUESTION 18
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 510s
- B. Multi-mode fiber between campus switches
- C. Two outdoor AP 367s
- D. Two outdoor AP 387s
Answer: C
NEW QUESTION 19
A customer placed an order for an ArubaOS 5406R switch and plans to rack mount it in a wiring closet. The dimensions of the switch are 17.5 inches wide (44.45 cm), 6.9 inches high (17.5 cm), and 17.75 inches deep (45.1 cm). How many rack units should a customer plan for this switch?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 20
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 15-30 feet (5-10 m)
- B. 3-10 feet (1-3 m)
- C. 3 feet (1 m)
- D. 30-60 feet (10-20 m)
Answer: C
NEW QUESTION 21
Which must you perform in IRIS to assign a device to a Design Group?
- A. Right-click the device and select Set Layer Membership
- B. Drag and drop the device into the Design Group
- C. Right-click the device and select Set Design Group
- D. Drag and drop the device into the Site
Answer: B
NEW QUESTION 22
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?
- A. Start Page
- B. Catalog
- C. Site-1
- D. Topology
Answer: C
NEW QUESTION 23
A customer has some employees that travel to various locations, where these employees will need Wi-Fi access at these locations. Because many of these locations do not have wireless support, the employees will need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be provided by a national phone company USB wireless card which will be connected to AP. The wireless solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.
Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost efficiently?
- A. 303H
- B. 203R
- C. 0
- D. 1
Answer: B
NEW QUESTION 24
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 25
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. S02.11V
- B. 802.11 ax
- C. 802.11r
- D. S02.11h
Answer: B
NEW QUESTION 26
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. implementing adequate security measures to ensure PCI compliance
- B. determining the RF channel bandwidth consumed per Barcode scanner
- C. roaming between APs
- D. providing consistent performance on all available channels
- E. encountering RF interference by devices
Answer: A,D
NEW QUESTION 27
A network architect is designing a new wireless solution for a company The company needs seamless roaming and client and AP active load balancing. The company also requires an Aruba Mobility Master (MM) to manage the wireless infrastructure. Which Aruba feature does the architect need to include in the design?
- A. IAP VC
- B. Client Match
- C. AirMatch
- D. Clustering
Answer: D
NEW QUESTION 28
A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?
- A. 3810M
- B. 0
- C. 1
- D. 2930F
Answer: D
NEW QUESTION 29
Which type of Aruba AP uses its radio as its back-haul connection?
- A. Air Monitor (AM)
- B. Mesh Porta
- C. Mesh Point
- D. Remote AP (RAP)
Answer: B
NEW QUESTION 30
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?
- A. 47.000 square feet {4,365 square meters)
- B. 338,100 feet {31,410 square meters)
- C. 55.750 square feet {5,175 square meters)
- D. 56.350 square feet {5,235 square meters)
Answer: D
NEW QUESTION 31
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 0
- B. 2930M
- C. 2930F
- D. 5406R
Answer: A
NEW QUESTION 32
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- A. density of users
- B. mobility requirements and usage
- C. type of users
- D. number of users per location
Answer: B
NEW QUESTION 33
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. lAPs in a cluster
- B. Two 7205 mobility controller and campus APs in a cluster
- C. FRAPs in a cluster
- D. Two 7030 mobility controller and campus APs in a cluster
Answer: C
NEW QUESTION 34
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?
- A. Only 802.11ax,802.1lac, and 802.l1n
- B. Only 802.11ax,802.11ac, 802.11n, and 802.11a
- C. Only 802.11ax and 8011.ac
- D. Only 802.11ax
Answer: A
NEW QUESTION 35
A customer requires a campus core virtualization solution that supports a dual control and management planes, as well as active-active forwarding paths. Which solution would meet the customer's requirements?
- A. VSX
- B. Backplane stacking
- C. VSF
- D. Mesh stacking
Answer: B
NEW QUESTION 36
When determining a customer's agenda and clarifying their expectations for a new HPE/Aruba deployment, which two questions should be asked during the stakeholder checklist? (Select two.)
- A. Which help desk system is deployed?
- B. What business problems are you trying to solve?
- C. What is your anticipated growth of the environment?
- D. What is the networking experience of onsite personnel?
- E. is a request for proposal or actual bill of materials (BOM) required?
Answer: B,E
NEW QUESTION 37
A network architect needs to plan a new wireless network
- A. Airwave, Central, Windows, Mac OSX, and Linux
- B. Central only
- C. Airwave, Central, and Windows only
- D. Airwave and Central only
Answer: D
NEW QUESTION 38
......
How much Aruba Certified Design Associate Exam costs
- Length of Exam: 90 min
- Types of questions: Performance Based Questions
- No of Questions: 52 Questions
- Examination Fees: $180 USD
- Passing Score: 67% or higher
- Examination Name: Aruba Certified Design Associate Exam
Get Top-Rated HP HPE6-A66 Exam Dumps Now: https://www.dumps4pdf.com/HPE6-A66-valid-braindumps.html
Pass Your HPE6-A66 Dumps Free Latest HP Practice Tests: https://drive.google.com/open?id=1s-4rRaM8MZtcvOt6lB9TUZsBe_uLr32B