100% Pass Guaranteed Accurate NS0-184 Answers 365 Days Free Updates
NS0-184 DUMPS Q&As with Explanations Verified & Correct Answers
NEW QUESTION 34
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. FlashCache
- B. thin provisioning
- C. Flash Pool
- D. FlexClone volumes
Answer: A,C
NEW QUESTION 35
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use a USB drive with the new software image and let ONTAP automatically boot.
- B. Use ONTAP System Manager to upload and install the new software image.
- C. Use the cluster image package get and cluster image update commands.
- D. Use ONTAP System Manager to download and install the new software image.
Answer: C,D
NEW QUESTION 36
What is the default shelf ID for disk shelves with IOM12 modules?
- A. 01
- B. 00
- C. 0
- D. 1
Answer: B
NEW QUESTION 37
What are two ways to identify an AFF All SAN Array system? (Choose two.)
- A. View the ONTAP System Manager system nodes.
- B. Use the san config show CLI command.
- C. View the ONTAP System Manager cluster settings.
- D. Use the cluster image show CLI command.
Answer: A,B
NEW QUESTION 38
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. command history
- B. EMS messages
- C. SNMP traps
- D. AutoSupport messages
Answer: A,D
NEW QUESTION 39
Click the Exhibit button.
After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case.
Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)
- A. Open https://support.netapp.com, using the partner credentials.
- B. Open My Cases, and select Create a Case.
- C. Open My Cases, and select the 41747189 case number.
- D. Open https://support.netapp.com, using the customer credentials.
Answer: C,D
NEW QUESTION 40
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)
- A. Active IQ System Manager
- B. Active IQ Config Advisor
- C. Hardware Universe
- D. Interoperability Matrix Tool
Answer: B,D
NEW QUESTION 41
Your customer wants to know more about the network configuration within the cluster.
In this scenario, which statement is correct about a LIF?
- A. A LIF separates network domains to access cluster data.
- B. A LIF is an IP address or a WWPN that is associated with a port.
- C. A LIF is created within a broadcast domain and contains a pool of IP address.
- D. A LIF is a port that provides physical connections.
Answer: B
NEW QUESTION 42
You installed two separate clusters in an isolated data center without outbound network access. The customer wants to troubleshoot issues locally and also create custom Excel reports for capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?
- A. Active IQ Unified Manager
- B. Active IQ Digital Advisor
- C. Cloud Insights
- D. ONTAP System Manager
Answer: A
NEW QUESTION 43
You are installing a new six-node ONTAP 9.8 cluster. You have completed the initial configuration of the cluster interconnect switches and the ONTAP cluster.
In this scenario, which feature should you enable?
- A. cluster switch logging
- B. data center bridging protocol
- C. cluster switch health monitor
- D. IPv6 on all cluster ports
Answer: C
NEW QUESTION 44
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Remove the Ethernet cables.
- B. Move the SAS cables to a new stack.
- C. Disable out-of-band ACP.
- D. Enable in-band ACP.
Answer: B,C
NEW QUESTION 45
You are installing an AFF A700 system with two disk shelves using ADPv2. After setting up the cluster, you realize that one drive shelf was powered off and that the drives have not been assigned to any of the nodes.
In this scenario, which two resources will help you find a solution? (Choose two.)
- A. Active IQ Digital Advisor
- B. Active IQ Config Advisor
- C. NetApp Documentation Center
- D. NetApp Knowledge Base
Answer: B,D
NEW QUESTION 46
An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?
- A. Active IQ Upgrade Advisor
- B. NetAppDocs
- C. Active IQ Config Advisor
- D. Interoperability Matrix Tool
Answer: B
NEW QUESTION 47
You installed a new 2-node FAS500f ONTAP 9.8 switchless cluster that serves NAS volumes to both NFSv4.1 and SMB clients. The host operating systems have full flow control enabled on their data ports.
In this scenario, which two flow control settings would you verify? (Choose two.)
- A. Verify that the data network ports have full flow control disabled.
- B. Verify that the cluster network ports have full flow control disabled.
- C. Verify that the cluster network ports have full flow control enabled.
- D. Verify that the data network ports have full flow control enabled.
Answer: A,C
NEW QUESTION 48
Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)
- A. Cisco NX-OS
- B. Brocade FOS
- C. Cisco IOS
- D. Broadcom EFOS
Answer: A,D
NEW QUESTION 49
You are deploying an 8-node AFF A700 by using BES-53248 cluster switches. During the installation, you notice that ports higher than 16 are not coming online. You verify that the additional licenses are installed.
Which two additional steps must be taken to bring the additional ports online? (Choose two.)
- A. Re-enable each port
- B. Reload the RCF file
- C. Reload the firmware
- D. Reload the switch
Answer: B,D
NEW QUESTION 50
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. cluster LIFs
- B. private network
- C. management LIFs
- D. client network
Answer: A,B
NEW QUESTION 51
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure an SNMP community string on the cluster.
- B. Configure DNS on the cluster.
- C. Configure a firewall policy and allow SNMP.
- D. Configure a trap host on the cluster.
Answer: B,D
NEW QUESTION 52
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)
- A. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes
- B. the ability to move the volumes from the old nodes to the new nodes
- C. the ability to create a 4-node MetroCluster across the four nodes
- D. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
Answer: A,C
NEW QUESTION 53
You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface groups for higher performance and resiliency.
Which two NetApp best practices should you follow to satisfy these performance and resiliency requirements? (Choose two.)
- A. Use ports with different chipsets.
- B. Use ports from the same NICs.
- C. Use ports with the same chipsets.
- D. Use ports from different NICs.
Answer: C,D
NEW QUESTION 54
You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to join the new nodes to the cluster.
Which action must be taken to solve the problem?
- A. Install the CSHM configuration file.
- B. Reboot the controllers.
- C. Install the reference configuration file.
- D. Install the license file.
Answer: C
NEW QUESTION 55
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 56
......
NS0-184 dumps Exam Material with 60 Questions: https://www.dumps4pdf.com/NS0-184-valid-braindumps.html
NS0-184 Questions and Answers Guarantee you Oass the Test Easily: https://drive.google.com/open?id=1ROD5ntthU39a_aHaIFKyj1B6kkzx82am