The Most In-Demand EMC D-PDD-DY-23 Pass Guaranteed Quiz
New Version D-PDD-DY-23 Certificate & Helpful Exam Dumps is Online
NEW QUESTION # 75
When selecting a PowerProtect DD model, which standard practices should be used to conservatively calculate capacity and throughput?
- A. Capacity: First full backup + First incremental backup + (Weekly cycle * Number of weeks data is retained) Throughput: Size of average backup / Backup window time Allow for a minimum 10% buffer in both capacity and throughput
- B. Capacity: First full backup + First incremental backup + (Weekly cycle * Number of weeks data is retained) Throughput: Size of average backup / Backup window time Allow for a minimum 20% buffer in both capacity and throughput
- C. Capacity: First full backup + Incremental backups + (Weekly cycle * Number of weeks data is retained) Throughput: Size of largest backup / Backup window time Allow for a minimum 20% buffer in both capacity and throughput
- D. Capacity: First full backup + Incremental backups + (Weekly cycle * Number of weeks data is retained) Throughput: Size of largest backup / Backup window time Allow for a minimum 10% buffer in both capacity and throughput
Answer: C
NEW QUESTION # 76
Which two applications use the client direct feature? (Select 2)
- A. Dell NetWorker
- B. IBM Spectrum Protect
- C. Avamar
- D. Veritas Backup Exec
Answer: A,C
NEW QUESTION # 77
When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?
- A. CIFSTimeout to 3600 seconds
- B. SESSTIMEOUT to 7200 seconds
- C. SESSTIMEOUT to 3600 seconds
- D. SMBTimeout to 7200 seconds
Answer: C
NEW QUESTION # 78
What is the Backup Data packet flow from the Amavar Client to the PowerProtect DD appliance?
- A. Through the Amavar Data Store and then to PowerProtect DD
- B. Direct from the client to PowerProtect DD
- C. Through the Storage Node and then to PowerProtect DD
- D. Through the Amavar Server and then to PowerProtect DD
Answer: B
NEW QUESTION # 79
An administrator is configuring an Azure cloud unit on their DD6900.
Which certificate must be imported before adding the cloud unit?
- A. S3 Flexible
- B. GlobalSign Root R2
- C. Baltimore CyberTrust Root CA
- D. GlobalSign Root R1
Answer: C
NEW QUESTION # 80
Which are supported compression algorithms in DDOS?
- A. dsp, gz, and lz
- B. rle, lzw, and lz
- C. lz, gz, and gzfast
- D. bmp, lz, and gz
Answer: C
NEW QUESTION # 81
An engineer is deploying a PowerProtect DD6900 system. The installation includes ES40, and DS60 expansion shelves on the same chain.
What consideration should be made when configuring the hardware?
- A. The maximum number of DS60 shelves is five
- B. The maximum number of ES40 shelves is four
- C. The maximum number of ES40 shelves is six
- D. The maximum number of DS60 shelves is six
Answer: B
NEW QUESTION # 82
A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 4 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 200 GB. The initial backup requires 800 GB with a 10 percent increase in the data each day.
Incremental backups are 400 GB. After data reduction, each incremental backup is 40 GB.
What is the weekly burn rate (GB) after four daily incremental backups and one weekly backup?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 83
What are some possible network bottlenecks for a PowerProtect DD?
- A. Routing protocols, switches and routers, and wire speeds
- B. Connectivity, routing protocols, and configuration
- C. Configuration, wire speeds, switches and routers
- D. Connectivity, firewalls, and routing protocols
Answer: A
NEW QUESTION # 84
How many cloud units are supported on a PowerProtect DD appliance when using Dell EMC Cloud Tier, and what is the maximum capacity for each unit?
- A. Two units, each less than or equal to the active tier capacity
- B. Four units, each less than or equal to the active tier capacity
- C. Two units, each up to half the active tier capacity
- D. Four units, each up to half the active tier capacity
Answer: A
NEW QUESTION # 85
An administrator is configuring an AWS S3 cloud unit on their DD9400.
Which certificate must be imported before adding the cloud unit?
- A. S3 Flexible
- B. GlobalSign Root R2
- C. Baltimore CyberTrust Root CA
- D. GlobalSign Root R1
Answer: C
NEW QUESTION # 86
An engineer is deploying a new PowerProtect DD9900 system that includes ES40, DS60, and FS25 expansion shelves.
What should the engineer consider when cabling the hardware?
- A. The FS25 shelf should be cabled on a separate chain
- B. The DS60 shelf should be cabled on a separate chain
- C. The FS25 shelf must be fully populated
- D. The DS60 shelf must be populated with identical drives
Answer: A
NEW QUESTION # 87
A PowerProtect DD with two ES40 expansion shelves was just installed. An error message is received.
What is the most likely reason?
- A. The host port on the expansion shelf connects upstream to the controller
- B. The expansion port on the last shelf connects back to the controller
- C. The expansion port on the shelf connects downstream to the host port of the next shelf
- D. The controller HBA port connects to the host port of an expansion shelf
Answer: B
NEW QUESTION # 88
Which is required to store and manage archive data on a single PowerProtect DD appliance to comply with regulatory standards?
- A. Dell EMC Cloud Tier
- B. Retention Lock Compliance
- C. Retention Lock Governance
- D. Encryption for Data at Rest
Answer: B
NEW QUESTION # 89
A backup administrator needs to retrieve an encrypted file that is in Azure Blob Storage. To retrieve the file, what must the administrator do first?
- A. Decrypt the file on the cloud tier
- B. Delete the file in Azure Blog Storage
- C. Recall the file to the cloud tier
- D. Decrypt the file in Azure Blob Storage
Answer: C
NEW QUESTION # 90
What is the maximum number of supported tape drives that can be configured using PowerProtect DD with at least 60 CPU cores?
- A. 0
- B. Unlimited
- C. 1
- D. 2
Answer: C
NEW QUESTION # 91
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD3300 Which compression algorithm will they see enabled by default
- A. Gz
- B. LZW
- C. Gzfast
- D. LZ
Answer: C
NEW QUESTION # 92
What is required to configure a cloud file system in a PowerProtect DD environment?
- A. Global store for a global copy of the cloud metadata
- B. Local store for a local copy of the cloud metadata
- C. Active tier encryption using the embedded Key Manager
- D. Active tier encryption using an external Key Manager
Answer: B
NEW QUESTION # 93
A backup administrator is using retention lock.
What happens when the retention period expires?
- A. Files can be modified and deleted
- B. Files cannot be modified or deleted until manual unlock
- C. Files can be modified but not deleted
- D. Files can be deleted but not modified
Answer: D
NEW QUESTION # 94
Which backup applications create their own storage units when they are configured to use a PowerProtect DD appliance as a backup target?
- A. Veritas NetBackup and Dell EMC NetWorker
- B. Dell EMC Avamar and Veritas Backup Exec
- C. Dell EMC NetWorker and Avamar
- D. Veritas Backup Exec and NetBackup
Answer: C
NEW QUESTION # 95
Which command is used to restart the initial CLI configuration wizard?
- A. setup
- B. install config
- C. config setup
- D. config
Answer: C
NEW QUESTION # 96
Refer to the exhibit:
If SAS HBA slot 1 port B is connected to Shelf 01 port BH, to which shelf and port should SAS HBA slot 2 port A be connected?
- A. Shelf 04 AH
- B. Shelf 01 BH
- C. Shelf 04 AE
- D. Shelf 01 AH
Answer: A
NEW QUESTION # 97
What three steps are required to integrate the PowerProtect DD appliance into the IBM Spectrum Protect environment using the NFS protocol on a Linux server? (Select 3)
- A. Configure the PowerProtect DD appliance for NFS networking.
- B. Configure NFS share on Client Node side.
- C. Install the Spectrum Protect application.
- D. Install Spectrum Protect Agent to Client Node.
- E. Configure the Spectrum Protect server for backups with an NFS mount export.
Answer: A,C,E
NEW QUESTION # 98
An administrator notices that several disks on a shelf show as unknown.
What should be done to resolve this issue?
- A. Ensure the expansion shelf is cabled properly
- B. Enter the disk unfail command for the unknown disks
- C. Enter the storage add enclosure command
- D. Cycle the power on the newly added expansion shelf
Answer: B
NEW QUESTION # 99
......
D-PDD-DY-23 Free Certification Exam Material with 165 Q&As : https://www.dumps4pdf.com/D-PDD-DY-23-valid-braindumps.html
UPDATED D-PDD-DY-23 Exam Questions Certification Test Engine to PDF: https://drive.google.com/open?id=1GI2spO7rSUYrZxRPX5gLIDH_YWV7wceQ