Get Special Discount Offer on FCP_FAZ_AN-7.6 Dumps PDF [UPDATED Feb-2026]
PDF Download Fortinet Test To Gain Brilliante Result!
NEW QUESTION # 39
Which log will generate an event with the status Unhandled?
- A. An AV log with action=quarantine.
- B. An IPS log with action=pass.
- C. An AppControl log with action=blocked.
- D. A WebFilter log will action=dropped.
Answer: B
Explanation:
In FortiOS 7.4.1 and FortiAnalyzer 7.4.1, the "Unhandled" status in logs typically signifies that the FortiGate encountered a security event but did not take any specific action to block or alter it. This usually occurs in the context of Intrusion Prevention System (IPS) logs. IPS logs with action=pass: When the IPS engine inspects traffic and determines that it does not match any known attack signatures or violate any configured policies, it assigns the action "pass". Since no action is taken to block or modify this traffic, the status is logged as "Unhandled."
NEW QUESTION # 40
Which statement describes archive logs on FortiAnalyzer?
- A. Logs a FortiAnalyzer administrator can access in FortiView
- B. Logs that are indexed and stored in the SQL database
- C. Logs compressed and saved in files with the .gz extension
- D. Logs previously collected from devices that are offline
Answer: C
Explanation:
Archive logs on FortiAnalyzer are logs that have been stored in files and, once a log file reaches its size limit, it is "rolled" and compressed, becoming offline logs. These compressed archive logs are saved as files, typically with the .gz extension, and are not immediately viewable or reportable in FortiView, Log View, or Reports panes.
https://docs.fortinet.com/document/fortianalyzer/7.6.3/administration-guide/761825/analytics-and- archive-logs
NEW QUESTION # 41
Which statement correctly describes one Difference between templates and reports?
- A. Reports provide mora configuration options than templates
- B. Templates can be cloned, but reports cannot be cloned.
- C. Reports support macros, but templates do not.
- D. Template are mapped to device groups. while reports are mapped to ADOMs
Answer: A
NEW QUESTION # 42
Which statement about automation connectors in FortiAnalyzer is true?
- A. The actions available with FortiOS connectors are determined by automation rules configured on FortiGate.
- B. The local connector becomes available after you connectors are displayed.
- C. An ADOM with the Fabric type comes with multiple connectors configured.
- D. The local connector becomes available after you configured any external connector.
Answer: A
NEW QUESTION # 43
Which statement about sending notifications with incident updates is true?
- A. Each connector used can have different notification settings
- B. Each incident can send notification to a single external platform.
- C. You must configure an output profile to send notifications by email.
- D. Notifications can be sent only when an incident is created oi deleted.
Answer: A
NEW QUESTION # 44
Which statement about exporting items in Report Definitions is true?
- A. Chart exports contain associated datasets.
- B. Templates can be exported.
- C. Datasets can be exported.
- D. Template exports contain associated charts and datasets.
Answer: D
NEW QUESTION # 45
What is the purpose of running the command diagnose sql status sqlreportd?
- A. To identify the database log insertion status
- B. To view a list of scheduled reports
- C. To display the SQL query connections and hcache status
- D. To list the current SQL processes running
Answer: C
Explanation:
The command diagnose sql status sqlreportd is used in FortiAnalyzer to obtain specific information about the SQL reporting process and caching status. Here's what this command accomplishes and an analysis of each option:
Command Functionality:
sqlreportd is the FortiAnalyzer daemon responsible for managing SQL-based reporting processes. The diagnose sql status sqlreportd command provides information on active SQL query connections and the hcache (historical cache) status, which helps in monitoring and troubleshooting SQL report generation.
NEW QUESTION # 46
What is the main purpose of deploying RAID with FortiAnalyzer?
- A. To make an identical copy of log data on two separate physical drives
- B. To store data in chunks across multiple drives
- C. To back up your logs
- D. To provide redundancy of your log data
Answer: D
NEW QUESTION # 47
When you move a FortiGate device from one ADOM to a new ADOM, what is the purpose of rebuilding the new ADOM database?
- A. To run reports on the device's analytics logs in the new ADOM
- B. To migrate the archive logs to the new ADOM
- C. To remove the device's analytics logs from the old ADOM
- D. To reset the disk quota enforcement to default
Answer: A
NEW QUESTION # 48
Which log will generate an event with the status Contained?
- A. An AV log with action=quarantine.
- B. An AppControl log with action=blocked.
- C. An IPS log with action=pass.
- D. A WebFilter log will action=dropped.
Answer: A
NEW QUESTION # 49
What should you always do after erasing the FortiAnalyzer configuration on flash?
- A. Perform a system backup
- B. Run the execute reboot command
- C. Run the execute format disk command
- D. Run the execute reset all-settings command
Answer: C
NEW QUESTION # 50
Exhibit. What is the analyst trying to create?
- A. The analyst is trying to create an output variable to be used in the playbook.
- B. The analyst is trying to create a trigger variable to the used in the playbook.
- C. The analyst is trying to create a SOC report in the playbook.
- D. The analyst is trying to create a report in the playbook.
Answer: A
Explanation:
In the exhibit, the playbook configuration shows the analyst working with the "Attach Data" action within a playbook. Here's a breakdown of key aspects:
Incident ID: This field is linked to the "Playbook Starter," which indicates that the playbook will attach data to an existing incident.
Attachment: The analyst is configuring an attachment by selecting Run_REPORT with a placeholder ID for report_uuid. This suggests that the report's UUID will dynamically populate as part of the playbook execution.
Option B - Creating an Output Variable:
The field Attachment with a report_uuid placeholder suggests that the analyst is defining an output variable that will store the report data or ID, allowing it to be attached to the incident. This variable can then be referenced or passed within the playbook for further actions or reporting.
NEW QUESTION # 51
Which statement about SQL SELECT queries is true?
- A. They must be followed immediately by a WHERE clause.
- B. They can be used to display the database schema.
- C. They can be used to purge log entries from the database.
- D. They are not used in macros.
Answer: D
Explanation:
FortiAnalyzer and similar systems often use macros for automated functions or specific query- based tasks. SELECT queries are typically not included in macros because macros focus on procedural or repetitive actions, rather than simple data retrieval.
NEW QUESTION # 52
Which FortiAnalyzer feature allows you to use a proactive approach when managing your network security?
- A. Threat hunting
- B. FortiView Monitor
- C. Incidents dashboard
- D. Outbreak alert services
Answer: A
Explanation:
FortiAnalyzer offers several features for monitoring, alerting, and incident management, each serving different purposes.
Option D - Threat Hunting:
Threat Hunting in FortiAnalyzer enables security analysts to actively search for hidden threats or malicious activities within the network by leveraging historical data, analytics, and intelligence.
This is a proactive approach as it allows analysts to seek out threats before they escalate into incidents.
NEW QUESTION # 53
Refer to the exhibit. Laptop1 is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than "admin", and coming from Laptop1.
Which filter will achieve the desired result?
- A. Operation-login and performed_on==''GU (10.1.1.120)' and user!=admin
- B. Operation-login and performed_on==''GUI(10.1.1.100)' and user!=admin
- C. Operation-login and srcip== 10.1.1.100 and dstip==10.1.1.1.210 and user==admin
- D. Operation-login and dstip==10.1.1.210 and user!-admin
Answer: B
Explanation:
On there the task was to create a filter for failed logins from any other location but the local computer:
"Add the text performed_on!~10.0.1.10.
This includes any attempts coming from devices with an IP address that is not the one configured on the Local-Client computer."
NEW QUESTION # 54
Exhibit. Which statement about the event displayed is correct?
- A. The security risk was blocked or dropped.
- B. The security event risk is considered open.
- C. The risk source is isolated.
- D. An incident was created from this event.
Answer: A
Explanation:
In FortiOS and FortiAnalyzer logging systems, when an event has a status of "Mitigated" in the Event Status column, it typically indicates that the system took action to address the identified threat. In this case, the Web Filter blocked the web request to a suspicious destination, and the event status "Mitigated" confirms that the action was successfully implemented to neutralize or block the security risk.
NEW QUESTION # 55
You find that as part of your role as an analyst, you frequently search log View using the same parameters.
Instead of defining your search filters repeatedly, what can you do to save time?
- A. Configure a custom view.
- B. Configure a custom dashboard.
- C. Configure a marco and apply it to device groups.
- D. Configure a data selector.
Answer: A
Explanation:
When you frequently use the same search parameters in FortiAnalyzer's Log View, setting up a reusable filter or view can save considerable time.
Option B - Configure a Custom View:
Custom views in FortiAnalyzer allow analysts to save specific search filters and configurations. By setting up a custom view, you can retain your frequently used search parameters and quickly access them without needing to reapply filters each time. This option is specifically designed to streamline the process of recurring log searches.
NEW QUESTION # 56
......
FCP_FAZ_AN-7.6 Dumps are Available for Instant Access: https://www.dumps4pdf.com/FCP_FAZ_AN-7.6-valid-braindumps.html
Provide Updated Fortinet FCP_FAZ_AN-7.6 Dumps as Practice Test and PDF: https://drive.google.com/open?id=15a83BmO9LPO1EojcGFL0eWEqvCNd4b48