Pass Your AD01 Exam Easily With 100% Exam Passing Guarantee [2021]
AD01 Dumps are Available for Instant Access from Dumps4PDF
How to book the AD01 Exam
These are following steps for registering the AD01 exam. Step 1: Visit to Pearson Exam Registration Step 2: Signup/Login to Pearson VUE account Step 3: Search for Blue Prism AD01 Exam Certifications Exam Step 4: Select Date, time and confirm with payment method
Difficulty in writing AD01 Exam
Blue Prism Accredited Developer certification is a most privileged achievement one could be graced with. But contrary to common views and opinions certifying with Blue Prism is not that difficult. If the candidates have proper preparation material to pass the AD01 exam with good grades. Certification questions contain the most exceptional questions answers and clarifications which cover the entire course content. Certification questions have a brilliant Blue Prism AD01 exam dumps with most recent and important questions and answers in PDF files. Dumps4PDF is sure about the exactness and legitimacy of Blue Prism AD01 exam dumps and in this manner. Candidates can easily pass Blue Prism AD01 exam with genuine AD01 dumps and get Blue Prism certification skillful surely. These dumps are viewed as the best source to understand the Blue Prism Accredited Developer well by simply perusing these example questions and answers. If candidate complete practice the exam with certification AD01 dumps along with self-assessment to get the proper idea on Blue prism accreditation questions and answers for successful completion of the certification exam. Then he can pass the exam with good grades easily.
NEW QUESTION 21
Study the following image showing pan: of the flow within a process:
What problems do you see with the process flow? (select 2 responses)
- A. There is a missing Recover stage on one of the routes through the flow.
- B. If an exception is thrown in the Cancel Reservation page and is allowed to bubble up to be caught by the Recover stage, the Create Reservation action won't be retried.
- C. The Retry Count is not being incremented for each retry.
- D. There is a missing Resume stage on one of the routes through the flow.
Answer: B,C
NEW QUESTION 22
Study the following process flow:
The Calculation Page stage is configured as follows:
The Calculation Page is as follows:
The Data Items are configured as follow:
* X is a Number data item with an initial value of 10
* Y is a Number data item with an initial value of 5
* Result is a Number data item with no initial value
The Start Stage is configured pass through the X and Y values as input parameters.
The divide calculation stage expression is [X] / [Y]
The end stage is configured to pass back the results value as an output parameter.
What will be contained in the Result Data Item on the Mam Page following the execution of the Process?
- A. 0
- B. 1
- C. 2
- D. No Value
Answer: C
NEW QUESTION 23
Consider the following process flow:
What is the problem with this flow?
- A. The Attach Block should be enlarged to also include the 'Waited Long Enough?' decision stage.
- B. The flow contains a recover stage and a route from it without a resume stage. This will cause internal error on future exceptions thrown in the same session.
- C. There is nothing wrong with this flow.
- D. The 0.5 second wait stage should be removed so that the retries can be performed at full speed.
- E. The exception handling in this flow can be removed because an Attach action in a navigate stage should always work if configured correctly
Answer: E
NEW QUESTION 24
When considering an element's attributes in Application Modeller which of the following statements are true?
(select all that apply)
- A. The attributes are provided to Blue Prism by the Target System
- B. The list of attributes may vary from application type to application type
- C. The initial selection of attributes made by Blue Prism will always be the optimum attribute set for the element
- D. Selected attributes are shown as ticks in the Match column of Application Modeller
Answer: A,B,D
Explanation:
Explanation
Reason: A) when spying the application, blueprism fetch all the elements of the target application only, blue prism doesn't provide any elements of its own.
C) Attributes are vary from application type to type. Attributes are different for windows, browsers, mainframe, java.
D) Reason is below.
NEW QUESTION 25
The Saved Quantity Data Item is configured as a number with the initial value 0.
The Loop Orders stage is configured to loop through the Orders collection.
The Get Quantity stage is configured as follows:
What will the data item Saved Quantity contain after the execution of the page?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 26
The Work Queue "Customer Onboarding' has a number of Pending Items which may be tagged as "Domestic",
"Retail" or "Business" There is also a tag for the 8 digit product code formatted as "Product Code: {product code}" e.g. Product Code: CA123456.
What is the correct configuration to get the next item from the queue that:
* Isn't applying for a loan product i.e. Product Code doesn't begin with "LN" And
* Is a domestic customer
- A. Configure 'Domestic and Product Code <> LN?" in the Tag Filter parameter
- B. Configure "Domestic; -Product Code: I_N"" in the Tag Filter parameter
- C. Configure "Domestic; -Product Code: LN?" in the Tag Filter parameter
- D. Configure "Domestic + [Product Code] <> LN*"" in the Tag Filter parameter
Answer: C
NEW QUESTION 27
Consider the following process flow from a sub-page of a process:
What is the problem with this sub-page flow?
- A. The exception stage within the flow should be removed and replaced with an End stage that returns the found data item as an output parameter.
- B. The sub-page process flow is missing any retry exception handling that should exist where a process calls object actions that interface with an application.
- C. For better visibility of the process logic the flow steps shown in the image should be on the main page rather than in a sub-page of the process.
- D. There is nothing wrong with the sub-page flow shown in this image.
Answer: D
NEW QUESTION 28
Consider the following flow in an object:
Which of these statements is true?
- A. The wait stages after read and write stages should be removed they are not required and are slowing the flow down
- B. The flow shown in the diagram is correct, the wait stages are all adding a high level of robustness to the action
- C. Only the first wait stage in this flow is required, all the other wait stages should be removed.
- D. The wait stages after read stages should be removed, the wait stages after write stages should be left because the application will have been changed
Answer: A
NEW QUESTION 29 
The data item "Loop Counter" is a number data item and has an initial value of 0. The data item "Max Loops" is a number data item and has an initial value of 10.
The two stages are configured as follows:
How many times will the Loop Again stage be executed when the page is executed?
- A. 0
- B. 1
- C. The loop will be infinite
- D. 2
Answer: C
NEW QUESTION 30
Look at this flow diagram from the Main Page of a process in Process Studio:
Thinking about the standard Blue Prism Process Templates, what is wrong with how this Main Page is handling exceptions?
- A. The exception handling in the image does not contain any concurrent exception logic. This means there is nothing stopping every item in the Work Queue being marked with the exact same System Exception.
- B. There is nothing wrong with the Main Page flow shown in the image, it is a copy of Blue Prism's standard Process Template.
- C. Between the Recover and Resume stages there should be logic to reset the application ready for the next case to be worked. For example, this could call the Close Down and Start Up pages.
- D. It would be better to remove the Exception Block and recover, resume logic, and instead handle any exceptions in the sub-pages. Flag data items could instead be passed up as output parameters from the sub-pages informing the Main Page flow if an exception has occurred.
- E. The Exception Block in the image should be extended to cover all stages in the flow rather than just 4 sub-pages.
Answer: E
NEW QUESTION 31
When entering an option within the Training Order system the relevant option number is entered into the Option number field as below. The Option number input field has been spied in Blue Prism:
The following attribute set has been returned by Application Modeller:
Which Attribute can be un-ticked to ensure consistent visibility of the element to Blue Prism?
- A. Screen Visible
- B. Class Name
- C. Window Text
- D. Visible
Answer: C
NEW QUESTION 32
Consider the following process flow:
What is the problem with this flow?
- A. The Attach Block should be enlarged to also include the Waited Long Enough decision stage.
- B. There is nothing wrong with this flow.
- C. The 0.5 second wait stage should be removed so that the retries can be performed at full speed.
- D. The exception handling in this flow can be removed because an Attach action in a navigate stage should always work if configured correctly
- E. The flow contains a recover stage and a route from it without a resume stage. This will cause internal errors on future exceptions thrown in the same session.
Answer: B
NEW QUESTION 33
You identify an element in Application Modeller and it highlights uniquely and can be used in your object flow diagram. The next day you find that Blue Prism cannot no longer identify the same element, your object flow is giving you 'Element not found' exceptions.
Which of the following statements is true?
- A. This must be an environment issue. The Blue Prism environment must be consistent and persistent, and an element that worked one day and does not work the next day suggests the environment is changeable. The IT team supporting the environment needs to be contacted to fix the problem.
- B. The Blue Prism product support team should be contacted to report the issue. This signifies an inconsistency in how the Blue Prism product is working which needs to be fixed.
- C. This suggests that Best Practice exception handling has not been implemented in the object. A retry loop around the object stages that are using the element will probably fix the problem.
- D. It is common for consistency issues to be found during configuration/development testing. The most likely cause is that an attribute has been selected for the element that is changeable, such as a window title with a date, or a URL. The developer needs to ensure that any changeable attributes are unticked.
Answer: D
NEW QUESTION 34
Which of the following flows can you not create in Blue Prism? (select 2 responses)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: B,C
NEW QUESTION 35
Examine the following process flow:
The Loop Orders loop is configured to loop through the Orders collection.
How Many times will the 'Process Order' page be executed?
- A. 0
- B. 1
- C. It's impossible to tell. There is no loop counter.
- D. The loop will be infinite
Answer: A
NEW QUESTION 36
......
The benefit in Obtaining the AD01 Exam Certification
- Get more job opportunities and increase their chances to get a better job
- Candidates can show their skills and expertise in developing solutions based on Blue Prism technology
- Include a credential to your resume and help you stand out of the crowd
- Proves their knowledge to work in Blue Prism development
- Candidates can improved capabilities and performance as Blue Prism developer
- Blue Prism certification gives you a global accreditation as Blue Prism Certified professional
Study resources for the Valid AD01 Braindumps: https://www.dumps4pdf.com/AD01-valid-braindumps.html
Latest Blue Prism Developer AD01 Actual Free Exam Questions: https://drive.google.com/open?id=1E_5jB2YGHQYeNFn4xLw3aNHltEbSZmNO