Latest [Nov 23, 2024] IBM C1000-058 Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning IBM C1000-058
IBM C1000-058 exam is a certification exam that can help IT professionals validate their skills and knowledge in administering IBM MQ V9.1. Earning this certification demonstrates that a candidate has the ability to install, configure, secure, monitor, and troubleshoot IBM MQ V9.1 environments. IBM MQ V9.1 System Administration certification can enhance a candidate's career prospects and can help them to stand out in the competitive IT job market.
IBM C1000-058 exam is designed for professionals who aspire to become system administrators for IBM MQ V9.1. IBM MQ V9.1 System Administration certification validates the candidate’s expertise in managing and administering IBM MQ V9.1 systems, including their installation, configuration, and maintenance. C1000-058 exam tests the proficiency of the candidate in various areas of IBM MQ V9.1, such as security, backup and recovery, clustering, and troubleshooting.
IBM C1000-058 (IBM MQ V9.1 System Administration) Exam is a certification exam designed for professionals who want to validate their skills in administering IBM MQ V9.1. C1000-058 exam is intended for system administrators, system architects, and developers who have experience with IBM MQ and want to demonstrate their knowledge of its administration. Candidates who pass C1000-058 exam will earn the IBM Certified System Administrator - MQ V9.1 certification, which is a globally recognized credential in the IT industry.
NEW QUESTION # 65
Which term refers to a temporary fix applied to resolve a system issue while the root cause is being investigated?
- A. Permanent Solution
- B. Patch
- C. Quick Fix
- D. Workaround
Answer: D
NEW QUESTION # 66
Which two settings can be exported and imported from MQ Explorer? (Select two.)
- A. JMS administration object definitions
- B. Channel definitions for the queue managers
- C. Connection details for remote queue managers
- D. Queue manager set memberships, set definitions, and set filters
- E. Queue definitions for the queue managers
Answer: C,D
NEW QUESTION # 67
Which statement describes an MQl channel?
- A. A unidirectional communications link that connects an application to a queue manager.
- B. A bidirectional communications link between two queue managers.
- C. A bidirectional communications link that connects an application to a queue manager.
- D. A unidirectional communications link between two queue managers.
Answer: C
NEW QUESTION # 68
Due to a hardware failure, a queue manager stops. Both the queue manager configuration and log data are lost. The queue manager is unable to restart or to be recovered from the log.
In this situation, what can the administrator do to restore service?
- A. Use media recovery to restore damaged objects.
- B. Use the strmqm -s command to start queue manager in safe mode.
- C. Mount a new file system and move queue files onto new hardware.
- D. Recreate the queue manager and all of its objects from previously saved definitions.
Answer: D
NEW QUESTION # 69
What is the extension is used for IBM MQ FFST reports?
Response:
- A. fst
- B. dmp
- C. ffst
- D. fdc
Answer: D
NEW QUESTION # 70
Which channel may be configured with a channel auto-definition exit?
Response:
- A. Sender Channel
- B. Receiver Channel
- C. Client-Connection Channel
- D. Requester Channel
Answer: A
NEW QUESTION # 71
Statistics must be gathered for a channel on a distributed platform queue manager which connects to a z/OS queue manager. The channel will be processing a very high message volume and the processing impact to the distributed queue manager must be minimized.
What is the appropriate setting for the STATCHL property of the channel definition?
- A. Low with the QMGR STATCHL property set to NONE
- B. High
- C. Low
- D. Medium
Answer: C
NEW QUESTION # 72
The MQ administrator must meet a regulatory compliance requirement to preserve confidentiality of data in messages at rest, in traces, and in FFST files. Which MQ security control meets this requirement?
- A. Advanced Message Security with a non-blank ENCALG specified in the policy records.
- B. Set PasswordProtection to ALWAYS in the qm.ini file.
- C. Use an API or API Crossing exit that encrypts the messages.
- D. A non-blank value in the channel's SSLCIPH attribute.
- E. Response:
Answer: A
NEW QUESTION # 73
Queue manager QM1 has a remote queue RMT1 which is a remote definitions of the local queue L1 on queue manager QM2.
How would an administrator define the transmission queue so that messages on RMT1 on QM1 are sent to L1 on QM2?
- A. DEFINE QUALIAS('QM2') USAGE(XMITQ)
- B. DEFINE QLOCAL('RMT1') USAGE(XMITQ)
- C. DEFINE QLOCAL('QM2') USAGE(XMITQ)
- D. DEFINE QREMOTE('L1') USAGE(XMITQ)
Answer: C
NEW QUESTION # 74
Which MQSC command is used to create a local queue in IBM MQ?
- A. SETUP QUEUE
- B. CREATE QUEUE
- C. DEFINE QUEUE
- D. MAKE QUEUE
Answer: C
NEW QUESTION # 75
In problem determination, what is the significance of a "Change Advisory Board" (CAB)?
- A. Documenting system issues
- B. Analyzing system resource utilization
- C. Approving and overseeing changes to system configurations
- D. Reviewing system backups
Answer: C
NEW QUESTION # 76
What command is used to find out which channel is expected to process the transmission queue QM2?
Response:
- A. DIS CHANNEL (MQM) WHERE(QMGR EQ QM2)
- B. DIS CHANNEL (QM1.TO.QM2) ALL
- C. DIS CHANNEL(*) WHERE(XMITQ EQ QM2)
- D. DIS CHANNEL (*) ALL (WHERE XMITQ EQ QM2)
Answer: C
NEW QUESTION # 77
What does a feasibility study involve in the context of IT planning?
- A. Defining the project scope
- B. Evaluating whether the project is achievable and worthwhile
- C. Documenting project timelines
- D. Assessing the potential risks of the project
Answer: B
NEW QUESTION # 78
What does "Phishing" typically involve in the context of cybersecurity?
- A. Physical theft of hardware devices
- B. Deceiving individuals to reveal sensitive information by posing as a trustworthy entity
- C. Gaining unauthorized access to a network
- D. Infecting systems with a virus
Answer: B
NEW QUESTION # 79
What does the term "Change Management" relate to in Configuration?
- A. Managing the process of modifying configurations in a controlled manner
- B. Documenting historical system changes
- C. Ensuring all configurations are static
- D. Tracking network speed changes
Answer: A
NEW QUESTION # 80
What command line tool is used to manage queue manager objects?
Response:
- A. mqm.sh
- B. runmqsc
- C. mqexplorer.exe
- D. mqm
Answer: B
NEW QUESTION # 81
In terms of installation, what does "Rack and Stack" mean in a data center context?
- A. Arranging network cables in a data center
- B. Configuring network switches
- C. Arranging server hardware within a rack for installation
- D. Installing software updates on servers
Answer: C
NEW QUESTION # 82
A new LTS release of IBM MQ is made generally available. The versioning information is 9.0.0.0.
When the next level of fixes is made available for this product what will the versioning information look like?
- A. 9.0.1.1
- B. 9.0.1.0
- C. 9.1.0.0
- D. 9.0.0.1
Answer: D
NEW QUESTION # 83
Given the following error on an MQ server: AMQ7280: WebSphere MQ queue manager 'x' appears unresponsive ln what file extension can this error be found?
Response:
- A. *.FST
- B. *.ERR
- C. *.ALR
- D. *.FDC
Answer: D
NEW QUESTION # 84
What is the primary goal of information security?
- A. Documenting all user activities
- B. Ensuring unlimited access to information
- C. Preventing unauthorized access, use, disclosure, disruption, modification, or destruction of information
- D. Maximizing system performance
Answer: C
NEW QUESTION # 85
What command is used to find out which channel is expected to process the transmission queue QM2?
- A. DIS CHANNEL (MQM) WHERE(QMGR EQ QM2)
- B. DIS CHANNEL (QM1.TO.QM2) ALL
- C. DIS CHANNEL(*) WHERE(XMITQ EQ QM2)
- D. DIS CHANNEL (*) ALL (WHERE XMITQ EQ QM2)
Answer: C
NEW QUESTION # 86
What is the purpose of a "Configuration Management Plan"?
- A. Documenting hardware serial numbers
- B. Outlining the strategy and procedures for managing system configurations
- C. Tracking software licensing information
- D. Recording user login activities
Answer: B
NEW QUESTION # 87
What setting of the MONQ attribute should be used to stop capturing monitoring data for all queues on the Queue Manager?
Response:
- A. DISABLE
- B. FALSE
- C. OFF
- D. NONE
Answer: C
NEW QUESTION # 88
......
Authentic Best resources for C1000-058 Online Practice Exam: https://www.dumps4pdf.com/C1000-058-valid-braindumps.html