Jun-2025 FREE Cisco 300-620 PRACTICE QUESTIONS AND ANSWERS UPDATES
DEMO FREE BEFORE YOU BUY 300-620 DUMPS
NEW QUESTION # 83
Which statement regarding ACI Multi-Pod and TEP pool is true?
- A. A different TEP pool must be assigned to each Pod.
- B. The Pod1 TEP pool must be split and a portion of the TEP pool allocated to each Pod.
- C. The same TEP pool is used in all Pods.
- D. The IP addresses used in the IPN network can overlap TEP pool of the APIC.
Answer: A
Explanation:
Section: ACI Anywhere
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739714.html
NEW QUESTION # 84
Refer to the exhibit.
Which two components should be configured as route reflectors in the ACI fabric? (Choose two.)
- A. apic2
- B. apic1
- C. Spine2
- D. Leaf1
- E. Spine1
- F. Leaf2
Answer: C,E
NEW QUESTION # 85
An engineer must configure a Layer 3 connection to the WAN router. The hosts in production VRF must access WAN subnets. The engineer associates EPGs in the production VRF with the external routed domain. Which action completes the task?
- A. Configure the Shared Route Control Subnet scope for the external EPG.
- B. Configure the External Subnets for the External EPG scope for the external EPG.
- C. Configure the Import Route Control Subnet scope for the external EPG.
- D. Configure the Export Route Control Subnet scope for the external EPG.
Answer: D
NEW QUESTION # 86
A network engineer demonstrates Cisco ACI to a customer. One of the test cases is to validate a disaster recovery event by resetting the ACI fabric to factory and then restoring the fabric to the state it was in before the event. Which setting must be enabled on ACI to export all configuration parameters that are necessary to meet these requirements?
- A. encrypted export destination
- B. generated a tech-support file
- C. enabled JSON format export
- D. enabled AES encryption
Answer: C
Explanation:
To export all configuration parameters necessary for disaster recovery in Cisco ACI, the setting that must be enabled is enabled JSON format export1. This format allows for a complete and structured export of the configuration that can be used for recovery purposes1.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/b_KB_Using_Import_Export_to_Recover_Config_States.html
NEW QUESTION # 87
What is MP-BGP used for in Cisco ACl fabric?
- A. MP-BGP VPNv4 AF is used as protocol on L3Out between a border leaf and an external router
- B. MP-BGP VPNv4 AF is used between spines in an ACI Multi-Pod fabric to propagate the endpoint
- C. MP-BGP Layer 2 VPN EVPN AF is used to propagate L30ut routes that are received from a border leaf.
- D. MP-BGP VPNv4 AF is used to propagate L3Out routes that are received from a border leaf to the fabric.
Answer: D
NEW QUESTION # 88
A network engineer must design a method to allow the Cisco ACI to redirect traffic to the firewalls. Only traffic that matches specific L4-L7 policy rules should be redirected. The load must be distributed across multiple firewalls to scale the performance horizontally. Which action must be taken to meet these requirements?
- A. Configure ACI Service Graph with Unidirectional PBR.
- B. Implement ACI Service Graph Two Nodes with GIPo.
- C. Implement ACI Service Graph with GIPo.
- D. Configure ACI Service Graph with Symmetric PBR.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739971.html

NEW QUESTION # 89
An organization deploys active-active data centers and active-standby firewalls in each data center. Which action should be taken in a Cisco ACI Multi-Pod to maintain traffic symmetry through the firewalls?
- A. Enable Endpoint Dataplane Learning.
- B. Disable service node Health Tracking.
- C. Enable Pod ID Aware Redirection.
- D. Disable Resilient Hashing.
Answer: C
Explanation:
In a Cisco ACI Multi-Pod environment with active-active data centers and active-standby firewalls in each data center, enabling Pod ID Aware Redirection is the action that should be taken to maintain traffic symmetry through the firewalls. This feature ensures that traffic is consistently directed through the active firewall based on the pod identifier, thus maintaining the desired traffic flow and symmetry2.
Reference:
Cisco ACI Multi-Pod and Service Node Integration White Paper
NEW QUESTION # 90
An engineer is extending EPG connectivity to an external network. The external network houses the Layer 3 gateway and other end hosts. Which ACI bridge domain configuration should be used?
- A. Forwarding: Custom
L2 Unknown Unicast: Hardware Proxy L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Enabled - B. Forwarding: Custom
L2 Unknown Unicast: Flood
L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Enabled - C. Forwarding: Custom
L2 Unknown Unicast: Hardware Proxy L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Disabled - D. Forwarding: Custom
L2 Unknown Unicast: Flood
L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Disabled
Answer: A
Explanation:
When extending EPG connectivity to an external network that houses the Layer 3 gateway and other end hosts, the ACI bridge domain configuration should use Forwarding: Custom, L2 Unknown Unicast: Hardware Proxy, L3 Unknown Multicast Flooding: Flood, Multi Destination Flooding: Flood in BD, and ARP Flooding: Enabled23. This configuration ensures that unknown unicast traffic is handled efficiently while still allowing ARP flooding, which is necessary for the ACI fabric to learn about endpoints on the external network23.
NEW QUESTION # 91
Refer to the exhibit. A Cisco ACI fabric has these configurations:
- VPC exists between Leaf2 and Leaf3.
- A switch profile called SW_Prof exists.
- A switch selector called SW_Selec exists.
- An interface selector named Int_Selec exists.
- An interface profile named Int_Prof exists.
Which two sets of actions must the engineer perform to connect Server1 to Leaf2 and Leaf3 using VPC? (Choose two.)
- A. Add Leaf2 and Leaf3 node IDs under switch selector SW_Selec.
Map switch profile SW_Prof under switch selector SW_Selec.
Create the explicit VPC group from access policies. - B. Add Leaf2 and Leaf3 node IDs under switch profile SW_Prof.
Map Int_Selec under Int_Prof.
Assign policy group to interface profile Int_Prof. - C. Create the explicit VPC group from fabric policies.
Map interface Eth1/1 under interface selector Int_Selec.
Assign policy group to interface selector Int_Selec. - D. Map switch selector SW_Selec under switch profile SW_Prof.
Add Leaf2 and Leaf3 node IDs under switch selector SW_Selec.
Assign policy group to interface selector Int_Selec. - E. Create the explicit VPC group from access policies.
Map Interface Eth1/1 under interface selector Int_Selec.
Map Int_Selec under Int_Prof.
Answer: D,E
NEW QUESTION # 92
An engineer is creating a configuration import policy that must terminate if the imported configuration is incompatible with the existing system. Which import mode achieves this result?
- A. best effort
- B. merge
- C. atomic
- D. replace
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/aci-fundamentals/ Cisco-ACI-Fundamentals-401/Cisco-ACI-Fundamentals-401_chapter_01011.html
NEW QUESTION # 93
Refer to the exhibit.
Which action should be taken to ensure authentication if the RADIUS servers are unavailable?
- A. Set the fallback login to local.
- B. Set the default login realm to LDAP
Changing the server priority is not logical answer.
The command "aaa user default-role no-login" means that remote users who do not have a user role cannot login. This means that assigning the user to default role will not be able to login.
The "aaa authentication login default" and "aaa authentication login fallback" has identical configuration. The fallback uses RADIUS server. We should change is to local. - C. Adjust the priority of server 10.1.1.1 to 1.
- D. Assign the user to the default role.
Answer: A
NEW QUESTION # 94
Which two components are essential parts of a Cisco ACI Virtual Machine Manager (VMM) domain policy configuration? (Choose two.)
- A. VMM domain profile
- B. IP address pool association
- C. EPG association
- D. Layer 3 outside interface association
- E. EPG static port binding
Answer: A,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals/b_ACI-Fundamentals_chapter_01011.html#concept_74EFC437C0AA44A391676F70ACE59DF3
NEW QUESTION # 95
A data center administrator is upgrading an ACI fabric. There are 3 APIC controllers in the fabric and all the servers are dual-homed to pairs of leaf switches configured in VPC mode. How should the fabric be upgraded to minimize possible traffic impact during the upgrade?
- A. 1. Create two maintenance groups for APIC controllers: VPC left and VPC right.
2. Upgrade the leaf switches.
3. Upgrade the first group of controllers.
4. Upgrade the second group of controllers. - B. 1. Create two maintenance groups for the leaf switches: VPC left and VPC right.
2. Upgrade the APIC controllers.
3. Upgrade the first group of leaf switches.
4. Upgrade the second group of leaf switches. - C. 1. Create two maintenance groups for the leaf switches: VPC left and VPC right.
2. Upgrade the first group of switches.
3. Upgrade the second group of switches.
4. Upgrade the APIC controllers. - D. 1. Create two maintenance groups for the APIC controllers: VPC left and VPC right.
2. Upgrade the first group of controllers.
3. Upgrade the second group of controllers.
4. Upgrade the leaf switches.
Answer: C
NEW QUESTION # 96
A RADIUS user resolves its role via the Cisco AV Pair. What object does the Cisco AV Pair resolve to?
- A. managed object class
- B. tenant
- C. security domain
- D. primary Cisco APIC
Answer: A
Explanation:
The Cisco AV Pair resolves to a managed object class. In the context of Cisco ACI, the AV Pair is used to define specific attributes for RADIUS users, which then map to managed objects within the ACI fabric3.
NEW QUESTION # 97
A Cisco APIC is configured with RADIUS authentication as the default The network administrator must ensure that users can access the APIC GUI with a local account if the RADIUS server is unreachable. Which action must be taken to accomplish this goal?
- A. Create an additional login domain that references local accounts
- B. Enable the fallback check with the default authentication domain
- C. Associate console authentication with the "RADIUS" realm.
- D. Reference the local realm in the fallback domain
Answer: D
NEW QUESTION # 98
Refer to the exhibit A Cisco ACI fabric is using out-of-band management connectivity The APIC must access a routable host with an IP address of 192 168 11 2 Which action accomplishes this goal?
- A. Change the switch APIC Connectivity Preference to in-band management
- B. Remove the in-band management address from the APIC.
- C. Add a Fabric Access Policy to allow management connections.
- D. Modify the Pod Profile to use the default Management Access Policy
Answer: B
NEW QUESTION # 99
Which two actions extend a Layer 2 domain beyond the ACI fabric? (Choose two.)
- A. creating an external physical network
- B. creating a single homed Layer 3 Out
- C. extending the bridge domain out of the ACI fabric
- D. extending the EPG out of the ACI fabric
- E. extending the routed domain out of the ACI fabric
Answer: C,D
Explanation:
There are several different ways to extend layer 2 domain beyond the ACI fabric:
* Extend the EPG out of the ACI fabric - A user can extend an EPG out of the ACI fabric by statically assigning a port (along with VLAN ID) to an EPG. The leaf will learn the endpoint information and assign the traffic (by matching the port and VLAN ID) to the proper EPG, and then enforce the policy. The endpoint learning, data forwarding, and policy enforcement remain the same whether the endpoint is directly attached to the leaf port or if it is behind a layer 2 network (provided the proper VLAN is enabled in the layer2 network).
* Extend the bridge domain out of the ACI fabric - Another option to extend the layer 2 domain is to create a layer 2 outside connection (or external bridged network, as called in the APIC GUI) for a given bridge domain. It effectively extends the bridge domain to the outside network.
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c07-732033.html#_Toc395143568
NEW QUESTION # 100
Which tenant is used when configuring in-band management IP addresses for Cisco APICs, leaf nodes, and spine nodes?
- A. common
- B. default
- C. infra
- D. mgmt
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/ b_KB_Configuring_Static_Management_Access.html#concept_CFF63FEBE947424291B0F10E6 F23DA7D
NEW QUESTION # 101
......
Latest Cisco 300-620 Dumps with Test Engine and PDF: https://www.dumps4pdf.com/300-620-valid-braindumps.html
Cisco 300-620 Exam Dumps Are Essential To Get Good Marks: https://drive.google.com/open?id=1MWknPd4fLowzThthkgDieZTZodoPCtTS