Get The Most Updated 300-430 Dumps To CCNP Enterprise Certification
Cisco Certified 300-430 Dumps Questions Valid 300-430 Materials
Cisco 300-430 exam is a 90-minute test that consists of 60-70 questions that cover various topics related to wireless networks, including network design, implementation, and troubleshooting. 300-430 exam is designed for professionals who have a minimum of three to five years of experience in designing, deploying, and managing wireless networks.
NEW QUESTION # 15
A network engineer wants to implement QoS across the network that support multiple VLANs. All the Aps are connected to switch ports and are configured in local mode. Which trust model must be configured on the switch ports to which the Aps are connected?
- A. IPP
- B. CoS
- C. WMM UP
- D. DSCP
Answer: C
NEW QUESTION # 16
An engineer needs to configure an autonomous AP for 802.Ix authentication. To achieve the highest security an authentication server is used for user authentication During testing, the AP fails to pass the user authentication request to the authentication server. Which two details need to be configured on the AP to allow communicator! between the server and the AP? (Choose two.)
- A. Group name
- B. PAC encryption key
- C. Shared secret
- D. Username and password
- E. RADIUS IP address
Answer: C,E
NEW QUESTION # 17
The marketing department creates a promotion video for the branch store.
Only interested hosts must receive the video over wireless multicast. What allows this feature?
- A. WMM
- B. WMF
- C. DCA
- D. TPC
Answer: B
NEW QUESTION # 18
An engineer manages the wireless network for a government agency. The wireless network is used for access to the corporate network. The wireless network must include the latest wIPS/wIDS detection definitions. Which action does the engineer take to ensure that this requirement is met?
- A. Update the Cisco MSE software.
- B. Configure Cisco Prime Infrastructure to push new definitions to the APs.
- C. Update the Cisco WLC software.
- D. Configure the Cisco WLC to repoll the Cisco MSE for update definitions.
Answer: C
NEW QUESTION # 19
Refer to the exhibit. A wireless engineer has integrated the wireless network with a RADIUS server. Although the configuration on the RADIUS is correct, users are reporting that they are unable to connect. During troubleshooting, the engineer notices that the authentication requests are being dropped. Which action will resolve the issue?
- A. Provide a valid client username that has been configured on the RADIUS server
- B. Allow connectivity from the wireless controller to the IP of the RADIUS server.
- C. Authenticate the client using the same EAP type that has been set up on the RADIUS server.
- D. Configure the shared-secret keys on the controller and the RADIUS seever.
Answer: D
Explanation:
https://community.cisco.com/t5/network-access-control/cisco-acs-11036-the-message- authenticator-radius-attribute-is/td-p/2054255
NEW QUESTION # 20
An engineer must implement a CPU ACL that blocks web management traffic to the controller, but they also must allow guests to r a h a Web Authentication Redirect page. To which IP address is guest client HTTPS traffic allowed for this to work?
- A. virtual interface IP
- B. DNS server IP
- C. Client int rface IP
- D. controller management
Answer: A
NEW QUESTION # 21
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: B
Explanation:
Note: To enable Local switching, you have to disable central switching
NEW QUESTION # 22
The CTO of an organization wants to ensure that all Android devices are placed into a separate VLAN on their wireless network. However, the CTO does not want to deploy ISE. Which feature must be implemented on the Cisco WLC?
- A. WLAN local policy
- B. custom AVC profile
- C. RADIUS server overwrite interface
- D. AAA override
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
NEW QUESTION # 23
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect group BranchA-FCG vlan add 30
- B. config flexconnect group BranchA-FCG vlan 30 add
- C. config flexconnect BranchA-FCG vlan 30 add
- D. config flexconnect BranchA-FCG vlan add 30
Answer: A
Explanation:
NEW QUESTION # 24
A customer reports that wireless clients are not able to receive multicast data from known working multicast servers on the wired network. The client is connecting at the highest mandatory wireless rate of 24 Mbps and the wireless controller is configured for multicast-unicast mode. What three actions should the engineer take next to troubleshoot the issue? (Choose three.)
- A. verify Multicast Listener Discovery (MLD) v1 snooping has been enabled to keep track of and deliver IPv4 multicast flows
- B. verify that the L3 interfaces are configured for pim sparse-dense-mode on the VLAN servicing the wireless access points as well as the wireless controller's management VLAN
- C. verify that Global Multicast mode has been enabled
- D. change the wireless controller from Multicast-Unicast mode to Multicast-Multicast mode and assign a multicast address in the 239.X.X.X/8 subnet
- E. make sure the highest mandatory rate is set to 54 Mbps so that the multicast traffic has sufficient bandwidth
- F. verify that IGMP snooping is disabled on the wireless controller since the access points are handling IGMP messages from the clients
Answer: B,C,D
NEW QUESTION # 25
A company is collecting the requirements for an on-premises event. During the event, a wireless client connected to a dedicated WLAN will run a video application that will need on average
391595179 bits per second to function properly. What is the QoS marking that needs to be applied to that WLAN?
- A. Silver
- B. Gold
- C. Platinum
- D. Bronze
Answer: B
NEW QUESTION # 26
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?
- A. RF Profile
- B. Flex Profile
- C. Policy Profile
- D. AP Join Profile
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/configguide/b_wl_16_10_cg/flexconnect.html
NEW QUESTION # 27
An IT administrator is managing a wireless network in which most devices are Apple iOS. A QoS issue must be addressed on the WLANs. Which configuration must be performed?
- A. Enable WMM TSPEC/TCLAS negotiation under Wireless > Advanced.
- B. Create a new AVC Profile named AUTOQOS-AVC-PROFILE and apply to all WLANs.
- C. Enable Fastlane under each WLAN setting.
- D. Enable Fastlane globally under Wireless > Access Points > Global Configuration.
Answer: C
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/wireless/controller/technotes/86/Enterprise_Best_Pra ctices_for_iOS_devices_and_Mac_computers_on_Cisco_Wireless_LAN.pdf
NEW QUESTION # 28
An engineer is adding APs to an existing VoWLAN to allow for location based services.
Which option will the primary change be to the network?
- A. moving to a bridging model
- B. AP footprint
- C. increased transmit power on all APs
- D. triangulation of devices
- E. cell overlap would decrease
Answer: B
Explanation:
With RRM, if more APs were added to an area, the power to each AP would decrease as it would detect that the APs would be talking over each other.
NEW QUESTION # 29
An enterprise has two WLANs configured on WLC. It is reported that when converting APs to FlexConnect mode. WLAN A works but WLAN B does not. When converting APs to local mode.
WLAN B works, but WLAN A does not. Which action is needed to complete this configuration?
- A. Create a Cisco FlexConnect group with WLAN-VLAN mapping.
- B. Join the APs to a Cisco FlexConnect group.
- C. Map the AP group to the WLAN interface.
- D. Disable local switching on the WLANs.
Answer: A
Explanation:
NEW QUESTION # 30
......
Cisco 300-430 exam consists of 60 to 70 multiple-choice and simulation questions that need to be completed within 90 minutes. 300-430 exam is conducted in a proctored environment, and candidates can take the exam at Pearson VUE testing centers around the world. 300-430 exam fee is $300, and candidates can register for the exam on the Cisco website.
Who should take the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
People who wish to explore the power of the dynamic culture of the Cisco Learning Network to jump-start their certification and lifelong learning goals should take this exam. Those who want to get useful tools for IT training for all Cisco certifications should also get this certification. People with prior knowledge of integrating wireless networks, and complete understanding of their implementation, from the service provider are highly recommended to take this exam and get themselves certified from Cisco.
List of the target audience for this exam:
- Network designers
- Network Operations Center (NOC) personnel
- Network managers
- Network architects
- Network supervisors
- Channel partners
- Network administrators
300-430 Premium PDF & Test Engine Files with 281 Questions & Answers: https://www.dumps4pdf.com/300-430-valid-braindumps.html
Current 300-430 Exam Dumps [2024] Complete Cisco Exam Smoothly: https://drive.google.com/open?id=1n5uBa8wJNeC4fvs457JNXvFtltZD7Awe