[Aug-2026] Verified 300-425 dumps Q&As - 300-425 dumps with Correct Answers
The Best CCNP Enterprise Study Guide for the 300-425 Exam
Cisco 300-425 exam, also known as Designing Cisco Enterprise Wireless Networks, is a certification exam that validates the skills and knowledge of IT professionals in designing, deploying, and managing wireless networks. 300-425 exam is intended for network engineers, wireless engineers, network administrators, and other IT professionals who want to enhance their expertise in wireless network technologies.
Exam Target Audience
Individuals qualifying for 300-425 exam are specialists who are into the designing of wireless network solutions which the enterprise requires. As a rule, these are network engineers or network analysts. They qualify for this validation only after passing the core exam that stands for Cisco core technologies targeting the network of an enterprise.
NEW QUESTION # 157
A wireless engineer must assess constraints for a future WLAN deployment for a site that consists of oce cubicles. Which signal propagation attenuation result is associated with this environment?
- A. absorption
- B. noise
- C. re ection
- D. refraction
Answer: A
Explanation:
In an office environment with cubicles, signal propagation is most commonly affected by absorption. This is because the materials used in cubicle walls, such as fabric and other dense substances, tend to absorb the radio frequency (RF) signals used in WLANs, leading to attenuation.
NEW QUESTION # 158
An engineer is designing a new wireless network. The network needs to fulfill the following requirements:
support multimedia applications
support a high concentration of wireless clients
support data over wireless
support roaming
Which approach should be used?
- A. coverage for cells at maximum power levels
- B. use of macro cells with reduced power levels
- C. use of macro cells with maximum power levels
- D. use of micro cells with reduced power levels
Answer: D
Explanation:
Micro cells with reduced power levels are suitable for environments with a high concentration of wireless clients and multimedia applications, as they help manage interference and allow for better roaming capabilities. References: ENWLSD 300-425 Official Cert Guide.
NEW QUESTION # 159
What is the main purpose of conducting a post-deployment site survey?
- A. To document network topology
- B. To create heatmaps
- C. To validate coverage and capacity
- D. To estimate AP placement
Answer: C
NEW QUESTION # 160
Users were moved from the local DHCP server to the remote corporate DHCP server. After the move, none of the users were able to use the network.
Which two issues will prevent this setup from working properly? (Choose two.)
- A. The route to the new DHCP server is missing.
- B. The DHCP server IP address configuration is missing locally.
- C. The broadcast domain is too large for proper DHCP propagation.
- D. Auto-QoS is blocking DHCP traffic.
- E. 802.1X is blocking DHCP traffic.
Answer: A,B
NEW QUESTION # 161
Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?
- A. in the aisle
- B. under the stage
- C. above the stage
- D. under the seat
Answer: D
Explanation:
NEW QUESTION # 162
During a post deployment site survey, issues are found with non-Wi-Fi interference.
What should the engineer use to identify the source of the interference?
- A. Cisco Spectrum Expert
- B. network analysis module
- C. Wireshark
- D. wireless intrusion prevention
Answer: A
Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/spectrumexpert/product_data_sheet09
00aecd807033c3.html
NEW QUESTION # 163
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?
- A. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane
- B. UDP 16667 for control plane, UDP 16666 for data plane
- C. UDP 16668 for control plane, UDP 16667 for data plane
- D. UDP 16666 for control plane, UDP 16667 for data plane
Answer: D
Explanation:
NEW QUESTION # 164
An engineer is deploying new APs to serve IEEE 802.11g through 802.11ac clients and wants to use the Ekahau Site Survey tool to verify RF coverage. Management wants the engineer to verify and create coverage maps as quickly as possible. Which configuration accomplishes the goal?
- A. active mode with two wireless adapters
- B. passive mode with one wireless adapter
- C. passive mode with two wireless adapters
- D. active mode with one wireless adapter
Answer: C
NEW QUESTION # 165
An engineer must create data-link redundancy for the company's Cisco Wireless LAN Controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
- A. Packets are always sent out on the same port they are received on.
- B. All interface traffic passes as long as one port is up.
- C. Full bandwidth of all links is available.
- D. Interface connection to two separate nonstacked switches is available.
- E. The same port has multiple untagged dynamics interfaces.
- F. Ports are grouped into multiple LAGs.
Answer: B,C,F
Explanation:
LAG-based redundancy is chosen for its ability to provide continuous connectivity as long as one port in the LAG is operational (B), utilize the full bandwidth capacity of all the links in the LAG (E), and allow for the grouping of ports into multiple LAGs for increased redundancy and bandwidth (F). Reference: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.
NEW QUESTION # 166
An engineer is using a Cisco AIR-2702i AP to conduct a Layer 1 site Survey, which mode is selected for the AP to discover non-Wi-Fi interference with metageek chanalyzer?
- A. Sniffer
- B. SE-connect
- C. Monitor
- D. FlexConnect
Answer: C
Explanation:
The Cisco AIR-2702i AP can be set to various modes for different purposes. For conducting a Layer 1 site survey to discover non-Wi-Fi interference, the AP should be set to Monitor mode. In this mode, the AP can scan the radio environment for interference sources without serving any clients, making it ideal for use with tools like Metageek Chanalyzer.
References: Designing Cisco Enterprise Wireless Networks (ENWLSD) 300-425 Official Cert Guide
NEW QUESTION # 167
A company is in the process of relocating to a new force space and ends out that the Internet circuit will not be ready before the move. The new building has a non-Cisco WLAN to which they can connect. The engineer has a 12-port switch and one Cisco autonomous AP and must connect multiple wired devices. Which additional device is needed to get all clients connected over the workgroup bridge?
- A. router
- B. wireless controller
- C. hub
- D. transparent firewall
Answer: A
Explanation:
To connect multiple wired devices over a workgroup bridge using an autonomous AP, a router is needed to manage the IP addresses and route traffic between the wired devices and the wireless network. The router will act as a gateway for the wired devices, allowing them to communicate with the WLAN. References: Cisco autonomous AP configuration guides and workgroup bridge deployment scenarios.
NEW QUESTION # 168
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- A. the client that has the highest RF properties
- B. the client with the worst RF characteristics
- C. the client that is used most by the company
- D. the client that is used least by the company
Answer: B
Explanation:
When designing a wireless network for diverse clients, it's crucial to ensure that the network will be reliable for all users. Therefore, surveys should be conducted with the client that has the worst RF characteristics, as indicated in option D. This approach ensures that the network is designed to support even the weakest client, thereby providing a consistent experience for all users.
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_Access_Points
NEW QUESTION # 169
An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?
- A. FT
- B. PMF
- C. GTK-randomization
- D. PEAP
Answer: A
Explanation:
NEW QUESTION # 170
An engineer has performed a predictive site survey for high-speed data and voice in an indoor office. What is the recommended data rate with -67 dBm signal level for optimal VoWLAN design?
- A. 24 Mbps on 802.11 an
- B. 6 Mbps on 802.11 bgn
- C. 24 Mbps on 802.11 bgn
- D. 12 Mbps on 802.11 an
Answer: C
Explanation:
NEW QUESTION # 171
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?
- A. location design model
- B. high-density design model
- C. voice design model
- D. roaming design model
Answer: B
Explanation:
In an auditorium seating 500 students with laptops, a high-density design model is appropriate. This model focuses on supporting a large number of devices in a concentrated area with sufficient coverage and bandwidth. It involves strategic AP placement, proper channel planning, and capacity planning to ensure all students have reliable wireless access. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice
https://www.cisco.com/c/dam/en_us/solutions/industries/docs/education/cisco_wlan_design_guide.pdf
NEW QUESTION # 172
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation
So, each AP will have 25 clients. Minimum 4 APs are sufficient.
NEW QUESTION # 173
A company has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity, 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?
- A. The high priority access point is oversubscribed.
- B. network ap-priority is set to enable.
- C. network ap-priority is set to disable.
- D. The critical priority access point count is oversubscribed.
Answer: A
NEW QUESTION # 174
A network engineer is working on a predictive WLAN design, the new wireless network must support access to Internet, email, voice, and the inventory database, to successfully support these services, which configuration must the engineer use for the signal strength levels and SNR on the planning tool?
- A. signal strength of -67 dBm, 20-dB SNR, and maximum 5 percent, packet loss.
- B. signal strength of-70 dBm,30-dB SNR. and maximum 10 percent packet loss.
- C. signal strength of 67 dBm, 20-dB SNR, and maximum 1 percent packet loss.
- D. signal strength of -67 dBm, 25-dB SNR, and maximum 1 percent packet loss.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057site-survey-gu
NEW QUESTION # 175
A customer is planning to replace older access points with Cisco 4800 Series Access Points.
Unaware of the infrastructure requirements, the client has an engineer investigate the inline power requirement. Which IEEE 802.3 standard complies with the Cisco 4800 Series Access Points?
- A. 802.3ac
- B. 802.3bt
- C. 802.3af
- D. 802.3at
Answer: A
Explanation:
The Cisco Aironet 4800 Series AP is a high-performance device that requires a significant amount of power (up to 31W for full functionality).2 While the AP can sometimes operate in a reduced mode using 802.3at (PoE+ which provides 25.5 max), its full feature set, including the Multigigabit (mGig) port speeds and USB functionality, requires the higher power delivered by Cisco Universal Power over Ethernet (UPOE) or the standardized version, IEEE 802.3bt (which provides up to 90W at the PSE, well exceeding the AP's maximum need).
NEW QUESTION # 176
......
Cisco 300-425 certification exam consists of 60 to 70 questions and candidates are given 90 minutes to complete it. The questions are in a multiple-choice format, and the exam is administered by Pearson VUE. In order to pass the exam, candidates must achieve a minimum score of 750 out of a possible 1000.
300-425 certification guide Q&A from Training Expert Dumps4PDF: https://www.dumps4pdf.com/300-425-valid-braindumps.html
300-425 Certification Overview Latest 300-425 PDF Dumps: https://drive.google.com/open?id=1SYnLwZ-R0YxvjDMXjK0sxXPhBB5gGH9f