[2021] 71300X Exam Dumps, Test Engine Practice Test Questions
Pass 71300X exam [Dec 08, 2021] Updated 70 Questions
Avaya 71300X Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 15
By default, which Codec does Avaya Aura Messaging (AAM) support?
- A. G.711
- B. G.726
- C. G.722
- D. G.729
Answer: A
Explanation:
Explanation
You must configure the Messaging system to use the G.711 encoding format.
Note: The G.711 format provides the highest audio quality especially when voice networks use multiple encodings and decodings. Avaya requires that you use the G.711 encoding format in Messaging systems that support TTY devices.
The G.711 encoding format uses a higher encoding rate than GSM. The G.711 encoding format therefore produces larger files and requires more storage space for messages. Messaging provides customers with adequate storage space for message playback and networking.
References: Administering Avaya Aura Messaging, Release 6.2 Issue 2.2 (December 2013) , page 201
https://downloads.avaya.com/css/P8/documents/100172127
NEW QUESTION 16
Which Avaya BreezeTM Cluster type is the Avaya Aura Presence Services snap-in installed on?
- A. General Purpose
- B. IM_Presence
- C. Presence Services
- D. Core Platform
Answer: D
Explanation:
Explanation
Verifying that Presence Services snap-in is ready to support Presence and IM Procedure
1. On the System Manager web console, navigate to Elements > Avaya Breeze> Cluster Administration.
2. Locate the row for the cluster, and verify that:
* The Cluster Profile field shows Core Platform.
etc.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), page 224
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 17
Which three statements about Avaya BreezeTM are true? (Choose three.)
- A. It is used by Avaya, Partner, and Enterprise Developers.
- B. It is a development platform that enables rapid development for applications that are targeted to meet a customer's communications needs.
- C. It allows application developers to quickly add new capabilities to their Avaya solutions.
- D. It was formerly called Collaboration POD but has been renamed to Avaya BreezeTM.
- E. It does not require a license.
Answer: A,B,C
Explanation:
Explanation
Avaya Breeze provides a virtualized and secure application platform where Java programmers can develop and dynamically deploy advanced collaboration capabilities that extend the power of Avaya Aura.
Customers, partners, and Avaya organizations can rapidly develop snap-ins and applications that are deployed on Avaya Breeze.
NEW QUESTION 18
In Avaya Aura Communication Manager (CM) for TSAPI, which type of CTI-link needs to be configured?
- A. TSAPI-IP
- B. DMCC-IP
- C. ASAI-IP
- D. ADJ-IP
Answer: D
Explanation:
Explanation
The Avaya AES server forwards CTI requests, responses, and events between Invision CTI Server and Communication Manager. The Avaya AES server communicates with Communication Manager over an AES link. Within the AES link, CTI links may be configured to provide CTI services to CTI applications such as Invision CTI.
Step 1: Enter the display system-parameters customer-options command. On Page 3, verify that Computer Telephony Adjunct Links is set to y.
Step 2: Enter the add cti-link m command, where m is a number between 1 and 64, inclusive.
Enter a valid Extension under the provisioned dial plan in Avaya Communication Manager, set the Type field to ADJ-IP, and assign a descriptive Name to the CTI link.
Etc.
References: Application Notes for Invision CTI with Avaya Aura Communication Manager and Avaya Aura Application Enablement Services - Issue 1.0, page 6
https://www.devconnectprogram.com/fileMedia/download/edd26666-ae98-4f15-9a2a-a156d0807160
NEW QUESTION 19
You want to multiplex all remote workers SIP messages to Avaya Aura Session Manager (SM) over the same TCP connection, rather than open a dedicated TCP connection for each user.
Which feature needs to be enabled for Avaya Session Border Controller for Enterprise (SBCE)?
- A. the Enable Grooming feature in the Advanced tab of the Avaya Aura Session Manager (SM) Server Profile
- B. the Stream Users Over Transport Link feature in the Signaling Interface
- C. the Enable Shared Control feature in the Signaling Interface.
- D. the Share Transport Link feature in the Advanced tab of the Avaya Aura Session Manager (SM) Server Profile
Answer: A
Explanation:
Explanation
Example:
References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 36
https://downloads.avaya.com/css/P8/documents/100183254
NEW QUESTION 20
Avaya Aura Presence Services 7.x is implemented on Avaya BreezeTM (formerly Engagement Development Platform (EDP)).
When looking at Elements > Breeze > Service Management > Services, which status would you expect for a Presence Services snap-in that is ready to support Avaya Aura Presence Services?
- A. Installed
- B. Loaded
- C. Active
- D. Accepting
Answer: D
NEW QUESTION 21
Which statement describes Cross-Origin Resource Sharing (CORS)?
- A. It is making DSP resources available regardless of the originating location of a call.
- B. It allows for signaling-groups to be used by more than one trunk-group.
- C. It is a network setup by which an Avaya Aura Media Server (AAMS) can be used by more than one Avaya Aura Communications Manager (CM).
- D. It is a W3C specification that allows cross-domain communication from the browser.
Answer: D
Explanation:
Explanation
Cross-origin resource sharing (CORS) is a mechanism that allows restricted resources (e.g. fonts) on a web page to be requested from another domain outside the domain from which the first resource was served. A web page may freely embed cross-origin images, stylesheets, scripts, iframes, and videos.
Note on the History of CORS:
Cross-origin support was originally proposed by Matt Oshry, Brad Porter, and Michael Bodell of Tellme Networks in March 2004 for inclusion in VoiceXML 2.1 to allow safe cross-origin data requests by VoiceXML browsers.
In May 2006 the first W3C Working Draft was submitted. In March 2009 the draft was renamed to
"Cross-Origin Resource Sharing" and in January 2014 it was accepted as a W3C Recommendation.
References: https://en.wikipedia.org/wiki/Cross-origin_resource_sharing
NEW QUESTION 22
To which other component does the Avaya Aura Application Enablement Services (AES) Switch Connections connect?
- A. Avaya Aura Session Manager (SM) using SIP
- B. Avaya Aura Communications Manager (CM) using SIP
- C. Avaya Aura Media Server (AAMS) using H.323
- D. Avaya Aura Communications Manager (CM) using H.323
Answer: D
Explanation:
Explanation
Adding a switch connection
The procedure include the following steps:
1.From the AE Services Management Console main menu, select Communication Manager Interface > Switch Connections.
2. On the Switch Connections page, in the Add Connection field, type a switch connection name (for example Switch1) For the Secure H323 Connection check box, do one of the following:
* For Communication Manager6.3.6 or later and TLS for the H.323 Signaling Channel (normally associated with FIPS Mode), select the Secure H323 Connection check box.
* For any previous release of Communication Manager without TLS for the H.323 Signaling Channel, uncheck the Secure H323 Connection check box.
Etc.
References: Avaya Aura Application Enablement Services Administration and Maintenance Guide, page 73
https://downloads.avaya.com/css/P8/documents/100171737
NEW QUESTION 23
After running the Install wizard on Avaya Session Border Controller for Enterprise (SBCE), you added a Public Outside IP address to the B1 interface. You try to ping this IP address from a PC in the same subnet but it falls.
What would you do first to resolve the issue?
- A. Set the Default Gateway router IP address, navigate to the Interfaces and Enable the B1 Interface.
- B. Reboot SBCE.
- C. Navigate to Device Specific Settings > Network Management > Interfaces and Enable the B1 interface.
- D. Restart Applications.
Answer: C
Explanation:
Explanation
The interface might need to be enabled.
2. Click on the Interface Configuration tab.
3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
204
NEW QUESTION 24
In the Avaya Session Border Controller for Enterprise (SBCE), before a traffic carrying Network Interface (A1 or B1) can be pinged, to which state do you have to toggle the status on Device Specific Settings > Network Management / Interfaces?
- A. Accept Service
- B. In-Service
- C. Enabled
- D. Active
Answer: C
Explanation:
Explanation
Commission the SBC-SBC Configuration
3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
203
NEW QUESTION 25
On Avaya Session Border Controller for Enterprise (SBCE), where do you access the tool that displays SIP messages, in real time, as they pass through the SBCE?
- A. from the SBCE EMS Web Console
- B. from the traceSIP client installed on a local PC
- C. from Avaya Aura System Manager, navigate to "Session Border Controller for Enterprise > SBCE Administration" menu
- D. from the SBCE Server command line via SSH session, using PuTTY
Answer: D
Explanation:
Explanation
Stat the tue Tracing Tools, TraceSM, SSH to Session Manager
1. Launch PuTTY (or similar client application) for a SSH session to Session Manager (port 22). Use the Session Manager IP Address (172.16.255.107).
2. Log in.
3. At the Session Manager command line type traceSM -x and press Enter.
Note: The traceSM tool shows the SIP call flow in Session Manager.
It gives insight into Session Manager's decisions.
Benefit: can filter certain types of SIP messages
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
485
NEW QUESTION 26
In Avaya Session Border Controller for Enterprise (SBCE) 7.x, you need to download the 46xxsettings.txt file to a Remote Worker device.
What needs to be configured under DMZ Services > Relay Services?
- A. Application Relay
- B. Reverse Proxy
- C. Application Relay and Reverse Proxy
- D. Application Relay and File Transfer
Answer: A
Explanation:
Explanation
Relay Services are used to define how file transfers (e.g., for phone firmware upgrades and configuration), are routed to the Remote Worker endpoints.
Example: 2 For accessing the file server using HTTPS protocol
The following screenshot shows the newly created Relay Services
References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 73
https://downloads.avaya.com/css/P8/documents/100183254
NEW QUESTION 27
To route calls to Avaya Aura Messaging (AAM), which routing strategy is used by Avaya Aura Session Manager (SM)?
- A. Registry Routing
- B. Automatic Route Selection (ARS)
- C. Automatic Alternate Routing (AAR)
- D. Network Routing Policies (NRP)
Answer: D
Explanation:
Explanation
Routing policies describe the conditions under which Session Manager will route calls between Communication Manager and Avaya Aura Messaging.
References: Application Notes for Configuring Avaya Aura Messaging 6.1 as a Voice Messaging Solution for Avaya Aura Communication Manager 6.0.1 Feature & Evolution Server Using SIP Trunks and Avaya Aura Session Manager 6.1 -Issue 1.0, page 25
https://www.devconnectprogram.com/fileMedia/download/08ad7375-7c2e-4767-929f-15f4e8130a0d
NEW QUESTION 28
What should be verified before running the initTM -f command on the Command Line Interface of Avaya BreezeTM platform (formerly known as Engagement Development Platform (EDP))?
- A. Verify that a valid Certificate is installed on the Avaya BreezeTM instance.
- B. Verify that an enrollment password is configured on System Manager and that it has not expired.
- C. Verify that Avaya BreezeTM is licensed.
- D. Verify that Avaya BreezeTM is configured as a Managed Element in Avaya Aura System Manager.
Answer: B
Explanation:
Explanation
See step 8 and step 9 below.
Repairing replication between Avaya BreezeTM and System Manager
Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate Avaya BreezeTM.
4. Verify that the status of the Synchronization Status field is green. If not, go to Step 5.
5. If Presence Services Snap-in has been deployed, in the Product column, verify that both Avaya BreezeTM and Presence Services are displayed.
6. Select Avaya BreezeTM, and click Repair.
7. After 2-15 minutes, verify that the status of the Synchronization Status field is green. If not, go to Step 8.
8. Verify that Enrollment Password is not expired.
a. Navigate to Services > Security.
b. In the navigation pane, click Certificates > Enrollment Password.
9. If the Enrollment Password is expired:
a. Enter a password, and click Commit.
It is highly recommended that the same password must be used. Otherwise, Avaya BreezeTM and Presence Services must be re-administered, because System Manager Enrollment Password was configured during deployment of Avaya BreezeTM.
b. Open an SSH session to the Avaya BreezeTM Management Module IP address as sroot.
c. On the command line interface, enter initTM -f.
d. When prompted for the enrollment password, enter the password that you provided in Step 9a.
e. Repeat Step 1 to Step 6.
References: Avaya Aura Presence Services Snap-in Reference, Release 7.0.1 (December 2016), page 223
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 29
A company is deploying Avaya Session Border Controller for Enterprise (SBCE) to support SIP trunking.
What is the minimum number of IP-addresses they need to assign to the private and public Network Interface Cards (NICs)?
- A. Two addresses are assigned to the private NIC and one address is assigned to the public NIC.
- B. Two addresses are assigned to the private NIC and two addresses are assigned to the public NIC.
- C. One address is assigned to the private NIC and two addresses are assigned to the public NIC.
- D. One address is assigned to the private NIC and one address is assigned to the public NIC.
Answer: D
Explanation:
Explanation
Example configuration:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
305
NEW QUESTION 30
What is the process for establishing a command line session to the AES Management IP Address, and logging in with the default account and default password?
- A. Use PuTTY to SSH to > AES Management IP Addr > using port 222, then enter login=admin password=admin01.
- B. Use PuTTY to SSH to > AES Management IP Addr > using port 22, then enter login=cust password=custpw.
- C. Use PuTTY to SSH to > AES Management IP Addr > using port 22, then enter login=craft password=crftpw.
- D. Use PuTTY to Rlogin to > AES Management IP Addr > using port 21, then enter login=admin password=admin.
Answer: C
Explanation:
Explanation
Use port 22, not port 21 or port 222.
Log in as craft and use the default password.
References: Application Enablement Services Installation and Upgrade Guide for a Bundled Server Release
4.0, page 29
https://downloads.avaya.com/elmodocs2/AES/4.0/02_300356_4.pdf
NEW QUESTION 31
The Avaya WebRTC solution uses the web intensively to make media calls from a standard web browser in the internet, into internal and secure communication premises in the enterprise.
Which statement about security between the Enterprise-edge and those standard Web browsers in the internet is true?
- A. A trust relationship based on certificates must be built to make WebRTC work.
- B. There must be a VPN connection between the Web Browser and the Enterprise-edge to build a WebRTC link.
- C. WebRTC only works within the Enterprise network. External Web Browsers must connect through an Avaya Session Border Controller for Enterprise (SBCE) via a SIP trunk.
- D. No trust relationship exists between enterprise edge security and web browsers; therefore, the security strategy is based on an Authorization Token instead.
Answer: D
Explanation:
Explanation
Validation of the authorization token.
The WebRTC Snap-in will validate the authorization token created and encrypted by the web server. If the snap-in can decrypt the token and ensure that the time stamp is valid, it knows that the incoming HTTP request is valid. The time stamp will usually be short lived; on the order of 5-10seconds to protect against reply attacks.
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 27
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 32
......
Avaya 71300X Real 2021 Braindumps Mock Exam Dumps: https://www.dumps4pdf.com/71300X-valid-braindumps.html