300-535 Dumps PDF New [2026] Ultimate Study Guide
300-535 Exam Dumps PDF Updated Dump from Dumps4PDF Guaranteed Success
NEW QUESTION # 28
What is a difference between JSON and XML in regard to data types?
- A. JSON is human-readable, whereas XML is binary.
- B. JSON uses comments, whereas XML supports arrays.
- C. JSON is binary, whereas XML is human-readable.
- D. JSON uses arrays, whereas XML supports comments.
Answer: D
Explanation:
JSON natively supports arrays as a data type, whereas XML allows comments but does not have a native array type.
NEW QUESTION # 29
Refer to the exhibit. Which lines of code need to be placed on the snippet where the code is missing to configure the disjoint path in Cisco SR-PCE?
- A. lsp 1 pcc ipv4 10.200.2.77 lsp-name PE1_PE3
lsp 2 pcc ipv4 192.168.217.32 lsp-name PE2_PE4 - B. group 1 pcc ipv4 10.200.2.77 lsp-name PE1_PE3
group 2 pcc ipv4 192.168.217.32 lsp-name PE2_PE4 - C. group 1 pce ipv4 10.200.2.77 lsp-name PE1_PE3
group 2 pce ipv4 192.168.217.32 lsp-name PE2_PE4 - D. lsp 1 pee ipv4 10.200.2.77 lsp-name PEl_PE3
lsp 2 pcc ipv4 192.168.217.32 lsp-name PE2_PE4
Answer: A
Explanation:
The correct syntax for associating LSPs with a disjoint path group in Cisco SR-PCE is to use the lsp keyword, specify the LSP number, pcc, the IPv4 address, and the LSP name.
NEW QUESTION # 30
Refer to the exhibit.
Which XML output is a valid instantiation of the YANG model?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: B
NEW QUESTION # 31
Drag and Drop Question
Drag and drop the code from the bottom onto the box where the code is missing to construct an XPath query to return all configured IPv6 addresses on the interfaces. Not all options are used.
Answer:
Explanation:
Explanation:
/*/ipv6-network/addresses/regular-addresses//address
The XPath query /*/ipv6-network/addresses/regular-addresses//address returns all <address> elements under the specified structure, retrieving all configured IPv6 addresses.
NEW QUESTION # 32
Refer to the exhibit. What is the result of the Ansible task?
- A. It configures a Cisco IOS router with BGP on AS500 and redistributes OSPF into BGP.
- B. It validates the BGP configuration on a Cisco IOS XE router, but it is a check mode-only network module and cannot modify the configuration on the router.
- C. It configures a Cisco IOS XR router with BGP AS65000 with two neighbors and redistributes OSPF into BGP.
- D. It validates the BGP configuration on a Cisco IOS XR router, but it is a read-only module and cannot modify the configuration on the router.
Answer: C
NEW QUESTION # 33
An engineer wants to replace the BLOCK_BAD ACL on the Cisco IOS XE router with this new content. The engineer wants to use RESTCONF for this and constructs a PUT request to the resource/restconf/data/native/ip/access-list/Cisco-IOS-XE-acl:extended=BLOCK_BAD. What must the body look like to achieve the Cisco IOS XE configuration?
Desired configutation:
ip access-list extended BLOCK_BAD
permit ip any host 192.168.20.1
deny ip any any
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: A
NEW QUESTION # 34
Drag and Drop Question
Drag and drop the steps from the left into the correct order on the right to deploy an already created service into NSO. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 35
Which Cisco IOS XR command should be used in order to enable LDP on all interfaces for which the IGP protocol is enabled?
- A. RP/0/0/CPU0:R1(config-ospf)#enable all
- B. RP/0/0/CPU0:R1(config-ospf)#mpls ldp interface all enable
- C. RP/0/0/CPU0:R1(config-ospf)#mpls ldp auto-config
- D. RP/0/0/CPU0:R1(config-ldp)#enable all
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION # 36
A user is debugging a problem with model-driven dial-in/out streams with gRPC for a Cisco IOS XR implementation. There is no streaming data and the path is not resolved when the show telemetry model- driven subscription command is issued on the router. What is the cause of the problem?
- A. There are polling interval problems.
- B. There is no support for IOS XR 64-bit.
- C. SNMP is not enabled.
- D. The emsd process is not running.
Answer: D
Explanation:
Reference: https://community.cisco.com/t5/service-providers-documents/implementing-grpc-telemetry-on-xr- devices/ta-p/3393966
NEW QUESTION # 37
Refer to the exhibit. Which two configuration leaves in this YANG model are optional? (Choose two.)
- A. mtu
- B. type
- C. enabled
- D. last-change
- E. oper-status
Answer: A,D
NEW QUESTION # 38
Refer to the exhibit.
Which JSON output is a valid instantiation of the YANG model?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: A
NEW QUESTION # 39
Refer to the exhibit. XTC has been configured by an engineer. What does the IPv4 address represent on the snippet?
- A. destination address of the router on which it listens for PCEP
- B. configured for the local peer for state synchronization
- C. configured for the remote peer for state synchronization
- D. local address of the router on which it listens for PCEP
Answer: D
NEW QUESTION # 40
Refer to the exhibit.
Which two URI entries are optional and functional in this RESTCONF URI structure? (Choose two.)
- A. fragment
- B. api-entry
- C. query
- D. path
- E. operation
Answer: C,D
Explanation:
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2016/pdf/DEVNET-1081.pdf page 25
NEW QUESTION # 41
FILL BLANK
Fill in the blank to complete the statement about NETCONF and Python libraries.
________________ is a Python library that facilitates client-side scripting and deploying changes to the network using the NETCONF protocol.
Answer:
Explanation:
Ncclient
Section: Automation and Orchestration Platforms
Explanation/Reference:
https://pypi.org/project/ncclient/
NEW QUESTION # 42
Refer to the exhibit.
Based on the YANG presented, what is the correct xpath to retrieve the router named "ios- device" under the "CustomerA" service name?
- A. /abc_service/CustomerA/"ios-device"
- B. /ncs:service/abc_service/"CustomerA"/ios-device
- C. /ncs:services/abc_service/CustomerA/ios-device
- D. /ncs:abc_service/CustomerA/ios-device
Answer: C
NEW QUESTION # 43
Which statement describes the Cisco ESC core engine component?
- A. It can be configured for high availability and cluster mode.
- B. It performs monitoring based on several monitoring methods.
- C. It interacts with the top orchestration layer using the REST and NETCONF/YANG NB APIs.
- D. It manages transactions, validations, policies, workflows, VM state machines, and rollbacks.
Answer: D
NEW QUESTION # 44
In which scenario does using a network configuration tool such as Ansible benefit configuration deployment and compliance?
- A. when orchestrating networking equipment that must be documented, templated, and automated
- B. when configuring several network devices that require the same or similar configuration
- C. when provisioning greenfield networking equipment configurations by using Cisco Prime Infrastructure
- D. when implementing configuration changes on equipment that lacks supporting protocols such as SSH or Telnet
Answer: A
Explanation:
Using a network configuration tool such as Ansible is most beneficial when orchestrating networking equipment that must be documented, templated, and automated, as it enables consistent, automated, and scalable configuration management.
NEW QUESTION # 45
Refer to the exhibit. Using the provided XML snippet, which Xpath expression prints "Jane"?
- A. //employee[1]/firstName/value()
- B. //employee[1]/firstName/text()
- C. //employee[0]/firstName/value()
- D. //employee[0]/firstName/text()
Answer: B
Explanation:
Xpath has a index number starting from 1, and I have run the snippet using lxml in python confirms index 1 is correct:
from lxml import etree
html = etree.parse('employee.html')
print type(html)
result = html.xpath('//employee[1]/firstName/text()')
print result
Output:
<type 'lxml.etree._ElementTree'>
['Jane']
NEW QUESTION # 46
......
Cisco 300-535 exam is designed for professionals who want to enhance their skills in automating and programming Cisco collaboration solutions. 300-535 exam is one of the most popular and in-demand certification exams among IT professionals as it helps them to take their careers to the next level in the field of collaboration technology. The Cisco 300-535 exam tests the candidates' abilities to design, implement, and troubleshoot automation solutions in Cisco collaboration environments. It examines the skills required to integrate Cisco collaboration solutions with other enterprise applications using REST APIs, Python programming, and other scripting languages.
Pass Your Cisco Exam with 300-535 Exam Dumps: https://www.dumps4pdf.com/300-535-valid-braindumps.html
300-535 Exam Dumps - Cisco Practice Test Questions: https://drive.google.com/open?id=1NOVrjpnyN67hh22RuAPoPIDHTLtl2_W1